Kasco Marine 2400D Dock De-Icer 1/2HP | Dock Deicer Bubbler | Ice Eater

Description

Kasco Marine 2400D - 1/2 HP Dock De-Icer
Product Details:
De-icers push warm bottom water to the surface creating an ice-free area of protection around your boat, dock, pier, or other in-water property. They help protect fish and aquatic species, by allowing for open areas where oxygen can enter the water. Use de-icers year-round for improved health and beauty of your water.
Product Features:
♦ Offered as 110-120V and 208-240V (60Hz), or 220V (50Hz)
♦ 50hz units are approved to CE standards
♦ 60hz units are ETL approved to CSA and UL standards
♦ 3 year limited warranty
MOUNT OPTIONS:
Universal Dock Mount
♦ For pipe with nominal diameter of 1 inch
♦ For units up to 1HP
Industrial Dock Mount
♦ For pipe with nominal diameter of 1.5 inches
♦ For units up to 1HP and pipe 5 feet long or greater
GENERAL INSTRUCTIONS
Inspect The Shipment
Immediately inspect your Kasco De-icer shipment for any visible damages. Damages should be reported immediately to your carrier and distributor.
Caution Warning
Under NO circumstances should anyone enter the water with the unit in operation. Always operate the unit in the water and keep people and objects clear of the propeller. Do not lift or pull the unit by the electrical cord. Always use extreme caution around electrical equipment and water.
Assembly & Installation
Please refer to the instructions enclosed in this manual. Each is specific for your model and size of de-icer and de-icer accessory.
Warranty
Kasco De-icers are the result of more than 50 years of design and engineering. Kasco products are built to withstand the toughest conditions. Kasco backs each de-icer with a 3-year Warranty. This warranty covers any and all manufacturer defects within 3 years from the date of purchase (see Warranty Policy).
Use & Operation
Kasco De-icers are designed and engineered for continuous duty in the harshest environments, such as in marinas or other commercial applications. Following installation, your Kasco De-icer is ready for immediate use. The motor is oil-filled, with ball bearings submerged in oil and equipped with a thermal overload protection and an automatic reset. No further lubrication is necessary. It is extremely important that the installer makes sure sufficient and proper voltage is available to the unit’s motor. The sacrificial anode located on the shaft below the propeller must be in good condition in order to prevent corrosion damage to the unit. The anode must be inspected periodically and replaced if it shows significant deterioration.